Brocade Fabric Features - Qlogic QLE2740L-DEL User Manual

3–Fibre Channel Configuration
Configuring FDMI

Brocade Fabric Features

Table 3-9
features.
Table 3-9. Brocade Fibre Channel Fabric Features—Default Configuration
Feature
D_Port Diagnostics port
support
FA-PWWN Fabric-assigned port
world wide name
F-BLD Fabric-based boot LUN
discovery
FC Ping Ping a Fibre Channel
N_Port or end device
FC Trace Route Obtains the path infor-
mation between two
F_Ports from the Fabric
Configuration Server
QoS CS_CTL Prioritize frames
depending on the value
of the CS_CTL field in
the FC Frame header
FDMI FDMI attributes
Enhancements
shows the default configuration for Brocade Fibre Channel fabric
Description
N/A
QConvergeConsole GUI
QConvergeConsole CLI
QConvergeConsole VMware
vCenter Server Plug-in
QConvergeConsole GUI
QConvergeConsole CLI
QConvergeConsole VMware
vCenter Server Plug-in
QConvergeConsole GUI
QConvergeConsole CLI
QConvergeConsole VMware
vCenter Server Plug-in
QConvergeConsole GUI
QConvergeConsole CLI
QConvergeConsole VMware
vCenter Server Plug-in
QConvergeConsole GUI
QConvergeConsole CLI
QConvergeConsole VMware
vCenter Server Plug-in
N/A
.
Management Tools
92
Default Configuration
Diagnostic test; run from
switch. Nothing to config-
ure on adapter.
Disabled by default on
adapter. Must be enabled
in NVRAM.
No default setting.
Requires configuration
on adapter.
Diagnostic test; nothing
to configure.
Diagnostic test; nothing
to configure.
By default, QoS of the
physical port is set to
High.
Nothing to configure on
adapter.
BK3254601-00 C