Genie GS-2046 Service Manual page 143

June 2003
REV A
Continued from the
previous page.
Part No. 72972
Install a 0 to 2000 psi
1500 PSI
(138 bar) pressure
gauge at the quick
disconnect coupling on
the function manifold
and activate the steer
right function.
less than
1500 PSI
Reset the steer relief
1500 PSI
valve pressure
(item AE or BF)
(See Repair Section).
less than
1500 PSI
Replace the steer relief
valve (item AE or BF).
Genie GS-2046 and GS-2646 and GS-3246
Section 5 • Troubleshooting Flow Charts
Are there mechanical yes
restrictions keeping the
steer left function from
moving?
no
Repair or replace the
steer cylinder OR
consult the Genie
Industries Service
Department.
Repair or replace the
steer cylinder OR
replace the steer left/
right valve cartridge
(item AF or BI) OR the
function manifold could
have an internal defect.
Consult the Genie
Industries Service
Department.
CHART 9
Remove the mechanical
restrictions.
5 - 17