Chapter 2 How To Certify Twisted Pair Cabling; Make Sure Your Tester Is Ready To Certify Cabling - Fluke DSX 5000 CableAnalyzer User Manual

Chapter 2: How to Certify Twisted Pair
Before you use the DSX CableAnalyzer, read the
safety information that starts on page 2.
Make Sure Your Tester is Ready to Certify
Cabling
To make sure your tester meets its accuracy specifications, follow
these guidelines:

Keep the tester's software current. The latest software is
available on the Fluke Networks website. See "Update the
Software" on page 71.

Set the reference for the twisted pair adapters every 30 days.
See page 30.

Make sure that you select the correct cable type for the job,
and that the NVP for the cable is correct. See Table 2 on
page 32.

Make sure you select the correct test limit for the job. See
Table 2 on page 32.

Make sure the cords and connectors for all test equipment
and patch cords are in good condition.

Make sure the battery is fully charged.

Send the modules to a Fluke Networks service center every 12
months for factory calibration.
riešenia na presné meranie

Warning

Cabling
29