Mitsubishi Electric MELSEC FX3U Programming Manual page 795

Melsec fx series programmable logic controllers
Table of Contents

Advertisement

FX
/FX
/FX
Series Programmable Controllers
3G
3U
3UC
Programming Manual - Basic & Applied Instruction Edition
The FLWR instruction writes data specified by the device
specified by the file ID or to the buffer inside the CF-ADP. The FLWR instruction can overwrite data in the line
position specified by the device
the buffer inside the CF-ADP, the FLWR instruction can only execute additional writing. When writing is
completed, the line position and column position after writing are as follows.
• When data in 1 line is written additionally
- Line position after writing : Written line position + K1
- Column position after writing : K1
• When a line having existing data is overwritten
- Line position after writing :
Written line position if data is not written to the final column position of specified the line position Line
position next to the written line position if data is written to the final column position of the line
- Column position after writing:
Column position next to the final written data point K1 if data is written to the final data point in the line
"K1" if data is written to the final data point in the line
Both additional writing and overwriting are executed to the maximum number of lines specified during file
creation. If data is written up to the final column position, the line position after writing varies depending on the
file type and setting.
• When the processing is stopped by the maximum line position in a normal file
Line position after writing = Maximum line position + K1
K-32768 when the maximum line position is "K32767"
• In the case of a normal file in which processing returns to the head of the file from the end of the file (ring
buffer file)
Line position after writing = K1
In either case, the column position after writing is "K1".
S
+1, and can write additional data (K-1). When the writing destination is
S
3
34 FX3U-CF-ADP Applied Instructions – FNC300 to FNC305
34.3 FNC 302 – FLWR / Data write
to a file stored in the CompactFlash
2
31
TM
card
32
33
34
35
36
37
38
A
B
793

Advertisement

Table of Contents
loading

This manual is also suitable for:

Melsec fx3ucMelsec fx3g

Table of Contents