Figure 4-23 Configuration Upload In Progress - Honeywell UDC3500 Product Manual

Monitoring and Operating the Controller
Close the IR configuration window and then single click on the "Online Configuration"
button.
Press any button on the controller's keyboard to activate the controller's IR port. Point
your IR dongle (if using PC) or your Pocket PC's IR port (if using Pocket PC) at the IR
window on the front of the controller and then click on the "Start" button. The P.I.E.
®
Tool should start uploading the configuration information from the controller as shown
below:
Once the upload is complete, click on the "Ethernet & Email" Group. Configure your
Ethernet and Email parameters per Section 3.30.
Once you have changed the Ethernet settings and downloaded them to your controller,
you will now be able to communicate with it via Ethernet.
272

Figure 4-23 Configuration Upload in Progress

UDC3500 Universal Digital Controller Product Manual 3/07