Siemens HiPath 1100 Service Manual page 33

Servicing Conditions (Mechanical)
This system was essentially designed for installation at a fixed location.
●
Warning
!
To avoid condensation when shipping the system in extremely low temperatures
●
keep the equipment in its packaging until it reaches room temperature. Proceed
thereafter with the installation (acceptable temperature range: 45.5°F (7.5°C)/30
min)
Do not expose the equipment to direct sunlight or place it in the proximity of any
●
heat sources (to avoid a localized increase of temperature)
Make sure the installation area is dry. During system operation avoid any
●
conditions that may cause condensation.
Forced ventilation is not required.
●
Do not block the natural flow of air around the equipment.
●
Do not expose the equipment to the weather.
●
A31003-K1160-S100-03-7620
Service Manual
Technical Standards and Compliance
System Data
2-11