Figure 6-16 Windows 98 Se - Usb Drivers Installation Location - Siemens HiPath 1100 Service Manual

Operation
Driver Installation
4. Select the "Specify a location" checkbox and click "Browse" to select the directory where
the uncompressed driver is stored. Drivers can be found on the CD, in the folder
\Software\USB Drivers. The driver is decompressed in C:\Temp (Default). If the
Administration driver is selected, the directory path will be
C:\Temp\HiPath1100_Adm_Drivers_040. If you select the Administration + CAPI Interface,
the directory path will be C:\Temp\HiPath1100_AdmCAPI_ Drivers_040. Select a folder
and click "Next";
Figure 6-16 Windows 98 SE - USB drivers installation location
5. A message will appear informing that a driver has been found. Click "Next" to proceed.
6. The installation of the USB drivers is confirmed. Click .Finish.
7. A message appears informing that HiPath 1000 is being searched. Repeat driver
installation procedures for USB interface devices (Steps 1 to 4).
To install administration drivers + CAPI Interface follow these steps:
8. During installation of the HiPath 1000 (CAPI Interface) configure these two settings:
9. In the next window select "EURO-ISDN (DSS1)" and click "Next":
6-21
A31003-K1160-S100-03-7620
Service Manual