Siemens HiPath 1100 Service Manual page 281

An External-to-External transfer can only be made when at least one of the lines is
a digital line.
External-to-External Transfer over an analog line is only allowed in Turkey. An Exter-
nal-to-External Transfer over an analog line is terminated in the following three situ-
ations:
• Elapsed timeout for external-to-external connection
(Code 218)
• When a busy signal is detected
• Polarity Inversion (Code 158)
Conditional Forwarding limited by extension (097)
Incoming calls can be forwarded to a specified destination list, as configured in a TAPI-type
application such as a Windows TAPI Browser. The settings of the previous list or Unconditional
Call Forwarding will be replaced with the new list settings.
The following information is needed for configuring a list:
Incoming Caller ID;
●
Day of the week and time;
●
Type of call (internal or external).
●
When more than one number have been specified for incoming calls to an extension, the call
forwarding priority will be:
1. Checks to see if the Caller ID for the incoming call matches the number programmed for the
extension
2. Checks to ensure that the Type of Call (internal or external) has been configured
3. Checks the time settings.
A31003-K1160-S100-03-7620
Service Manual
Configuring the system specifically for the client
Comments about the System's Programming Codes
7-43