Figure 6-11 Isdn Configuration Options - Siemens HiPath 1100 Service Manual

10. After exiting the CommServer, the server will restart automatically whenever a HiPath 1100
application is activated.
6.2.2.2 ISDN modem via S
The system can be administered remotely or locally through an ISDN interface.
For this option, only the HiPath 1100 applications are installed. After restarting the computer (if
Windows prompts you to restart the computer) configure the settings for the CommServer.
HiPath 1100 Applications
Manager Software
Billing
CAPI
Driver
ISDN
Card
S
0
Figure 6-11 ISDN Configuration Options
Procedure:
1. Make sure the HiPath 1100 system is turned on.
2. Insert the system CD in the CD drive.
If Auto-Run is not configured, go to the Start menu on Windows, click "Run" and then select
the "Browse" button in the dialog box. Open the file SETUP.EXE on the CD drive.
3. In the Setup window, select the language you want to use
4. A window will appear where you can select the software to be installed
A31003-K1160-S100-03-7620
Service Manual
module
0
Transmission
Status Monitor
CommServer
S
0
inte
BUS
Programming the system using a PC
HiPath 1100 Applications
Manager
Billing
CommServer
HiPath
1100
S
0
OR
ext
Operation
Software Transmission
Status Monitor
CAPI
Driver
ISDN
Card
S
0
Trunk
NTBA
6-16