Tables - Siemens HiPath 1100 Service Manual

Phone systems
Hide thumbs Also See for HiPath 1100:
Table of Contents

Advertisement

System Data
Limitations to System Expansion
*
Each system telephone (KS) connected occupies one analog telephone slot.
**
A S
and a TME1 module cannot be used simultaneously.
0
An ADSL module and a TME1 module cannot be used simultaneously on the HiPath 1150/1190.
*** When the maximum capability for external lines is exceeded due to the installation of EB, S
modules, the system disables a number of external analog lines. The extensions slots, however, will continue
to operate as usual.
Example 1: HiPath 1150
- Slot 0, MB 210,
- Slot 1, EB 210,
- Slot 3, TME1 - 20 channels
EB 210 external lines will not work but extensions will. This is because the system has capacity for a maximum
of 22 external lines, which means there is no capacity for additional analog external lines.
Example 2: HiPath 1150
- Slot 0, MB 210
- Slot 3, TME1 = 20 external lines
In this case, there are 22 external lines at a maximum available on the system. This means there is no room
for an additional EB module with an external analog line.
20 CAS external digital lines CA/S2+ 2 MB external analog lines = 22 external lines.
If an EB 200 was installed in Slot 1 or Slot 2 the module would not be operable, since it would exceed the
system's maximum capacity for external lines.
Example 3: HiPath 1150
- Slot 0, MB 210
- Slot 3, TME1 = 10 external lines
WARNING:Disable channels in the TME1 Module and configure unused external lines as Vacant by turning
the switch off then on again.
Overall, there are 12 external lines on the system. This means there are 4 additional external lines available
before reaching the maximum capacity of 16 external lines.
An EB 400 could be used in Slot 1 or Slot 2.
If an EB 800 was installed on the switch, the entire module would be inoperable since it would exceed the
system's maximum capacity for external lines.
Table 2-1
Specific limitations to system expansion
External analog line
2
2
2
2
2
2
2
4
4
6
6
8
8
10
10
12
2-6
Digital line - TME1 Module
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
or TME1
0
Total
22
21
20
19
18
17
16
17
16
17
16
17
16
17
16
17
A31003-K1160-S100-03-7620
Service Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hipath 1150Hipath 1120Hipath 1190

Table of Contents