Figure 6-3 Communication Server Properties - Configuring A Usb Connection - Siemens HiPath 1100 Service Manual

Operation
Programming the system using a PC
4. Select the software components you wish to install and install them. For programming the
HiPath 1100 system, the following applications must be installed:
HiPath 1100 Manager
●
CommServer (installs automatically).
●
5. After installation of each component, a message is displayed indicating that the installation
was successfully completed. Click "Next" every time it appears;
6. Click "Finish" to close the installation window. This completes the software installation.
Windows may display a message to restart the computer. If this occurs, restart the
computer.
7. After installation is completed, configure the Communication Server (see Figure 6-3).
Right-click the CommServer icon on the Windows status bar and select "Properties":
Figure 6-3 Communication Server Properties - Configuring a USB Connection
8. CommServer is called again whenever a HiPath 1100 application is activated.
6-7
A31003-K1160-S100-03-7620
Service Manual