Siemens HiPath 1100 Service Manual page 280

Configuring the system specifically for the client
Comments about the System's Programming Codes
Activate/Deactivate timer for outgoing external calls (048)
Activate/Deactivate the timer for a specified extension.
Timeout for a Second Attendant for MSN (082)
This consists of a time period (in seconds) during which an incoming call rings at the First
Attendant of an external line. If the call is not answered within the specified amount of time, it
will be directed to the Second Attendant.
Modem Extension (085)
This setting specifies the extension where the modem will be connected for serial remote
access.
MSN Extension Assignment for Outgoing External Calls (086)
Allows a group extension to make outgoing calls using one of the selected MSNs.
Transfer when Extension is Busy (217)
This setting allows transferring a call when an extension is busy. A warning tone can be heard
on the background at the extension that receives the transfer, meaning that there is a call
waiting.
When an extension does not answer a call after a specified period of time or because it is
configured with Do Not Disturb or Data Protection, the call rings at the extension that originated
the transfer. The period of time a call signals a busy extension can be configured using the
"Timeout when there is no answer (130)" on page 7-39 feature or the HiPath 1100 Manager.
Elapsed timeout for external-to-external connection (218)
It allows configuring a timeout between two external calls when no other extension is involved
in the call.
The user hears a warning tone before the timeout expires. A warning tone is sent 10 seconds
before the end of the timeout. When the call is between two external lines with no internal
extension involved, the call is terminated once the timeout elapses.
Configuring a Timeout for an External-to-External Connection (219)
It allows configuring a timeout between two external calls when no other extension is involved
in the call. Call timeout can be set from 1 minute to 24 hours (default setting is 1 hour).
External-to-External Transfer (091)
This feature allows a specified extension to transfer an external call (incoming or outgoing) to
another external call.
A31003-K1160-S100-03-7620
7-42
Service Manual