Siemens HiPath 1100 Service Manual page 261

Digital trunk settings
Programmed Cod
Functions e
S Ports 062
0
S 190
0 Line Operation
*
Mode
Symmetric/Asym- 074
metric Call
No ACK Setup for 075
S
0 Line
Notify 076
Automatic Keypad 077
Assigning a Digital 078
Line to a MSN
External line prefix 189
External Number 191
Registration
Assigning MSNs to 192
Attendants
A31003-K1160-S100-03-7620
Service Manual
Intermediate Data
Position/Slot:
HiPath 1120: 02
HiPath 1150: 03
HiPath 1190: 01 and 11
01, 02, 03 or 11
+
00 to 01 (HiPath 1120 - 00 only PP or
PMP)
00 to 04 (HiPath 1150)
00 to 04 (HiPath 1190)
01, 02, 03 or 11
+
00 to 01 (HiPath 1120 - 00 only PP or
PMP)
00 to 04 (HiPath 1150)
00 to 04 (HiPath 1190)
01, 02, 03 or 11
+
00 to 01 (HiPath 1120 - 00 only PP or
PMP)
00 to 04 (HiPath 1150)
00 to 04 (HiPath 1190)
01, 02, 03 or 11
+
00 to 01 (HiPath 1120 - 00 only PP or
PMP)
00 to 04 (HiPath 1150)
00 to 04 (HiPath 1190)
Slot: 001 to 140
1 - National
2 - International
Slot: 001 to 140
Slot: 001 to 140
+
1- Day Service
2- Night Service
3 - Second Attendant - Day
4 - Second Attendant - Night
Configuring the system specifically for the client
Table of the System's Programming Codes
Data to be
Programmed
1 - External line and exten-
sion
2 - External line
3 - Extension
1 - Point-to-point connec-
tion (PP)
2 - Point-to-Multipoint
connection (PMP)
3 - S Bus line
0
∗
- Asymmetric
# - Symmetric
∗
- To enable
# - To disable
∗
- To enable
# - To disable
∗
- To enable
# - To disable
external line or
∗
- To delete
Line prefix (up to 5 digits)
DID final digits (up to 20
digits)
Extension, Call Group (CG,
HG or UCD with up to 10
extensions per group) or
EVM Virtual Port (744-747 ,
for Second Attendants
only).
∗
- To delete
Completing Default
Data Entry
# instead of 1 - External
slot position line and
extension
# instead of 1 - First port
slot position 3 - All other
ports
Automatic # - Symmet-
ric
Automatic It varies
depending
on the coun-
try
Automatic It varies
depending
on the coun-
try
Automatic # - To disable
# instead of All assigned
slot position lines
# instead of None
the digit or
Automatic
# instead of None
slot position
# instead of None
extension
7-23