Uninstall - Siemens HiPath 1100 Service Manual

4. To complete the installation process answer the introductory messages by clicking "Next"
Click "Finish" to close the installation window.
The following applications are then installed on your computer:
ISDN Setup Wizard (Windows 98 SE/ME)
●
CAPI Monitor
●
Uninstaller
●
FaxComm + Installation
●
Loopback Test
●
Outgoing Numbers Configuration (MSN) (Windows 2000/XP)
●
.
Restart the computer after installation of USB drivers and CAPI applications.
The USB drivers are Plug&Play compatible, so that after installation, the optiPoint
system may be removed and added again to the computer configuration - by simply
unplugging or connecting the USB cable. The drivers do not need to be reinstalled.
The equipment is ready for operation.
6.3.2.4

Uninstall

For the S connection, follow steps 1, 6 and 7 of the procedure ;
●
0
For the USB connection, follow steps 1 through 7 of the procedure below.
●
Procedure:
1. To exit CommServer right-click the CommServer icon on the Windows Status bar and
select Finish.
2. Exit all online services for optiPoint CallBridge for Data;
3. Disconnect the computer USB cable from the optiPoint system;
4. To remove the USB drivers, proceed as follows:
For FULL removal use Uninstall, or the Uninstall feature on the CD.
5. Uninstall CallBridge for Data Utilities (if previously installed to use online services or USB
connections) by running the Uninstall program as follows: Start/Programs/CallBridge for
Data Utilities/Uninstall CallBridge for Data Utilities. Once CallBridge for Data Utilities has
been uninstalled, answer "No" when asked if you want to restart your computer, and
proceed with step 6.
A31003-K1160-S100-03-7620
Service Manual
Operation
Driver Installation
6-48