Table 7-3 Classification Of Programming Tables - Siemens HiPath 1100 Service Manual

Table
11. ADSL Module
12. Relay and sensor on the HiPath 1120
Table 7-3 Classification of programming tables
For information on the programming of each feature see "Comments about the System's
Programming Codes" on page 7-27
Important settings
Programmed Cod
Functions e
Default Access to a 002
Group of External
Lines
Special Class of 096
Service for a
Blocked Extension
COS assignment 111
Phonebook/Speed 112
Dial
Dialing Mode on an 119
External Analog
Line
A31003-K1160-S100-03-7620
Service Manual
Intermediate Data
Extension
Extension
Group of external lines
Day COS:
class - 0 (No Permission)
Class - 1 (Denied List 1)
Class - 2 (Denied List 2)
Class - 3 (Denied List 3)
Class - 4 (Permission List 1)
Class - 5 (Permission List 2)
Class - 6 (Permission List 3)
Class - 7 (default for all lines)
Night Service COS:
Class - 1 (Denied List 1)
Class - 2 (Denied List 2)
Class - 3 (Denied List 3)
Class - 4 (Permission List 1)
Class - 5 (Permission List 2)
Class - 6 (Permission List 3)
Class - 7 (Default for all lines)
Phonebook entry:
*
000 to 249
External analog line
Configuring the system specifically for the client
Table of the System's Programming Codes
Explanation
Data to
Program
Group of external lines
COS - 0 (No Permission)
COS-1 (Denied List 1)
COS-2 (Denied List 2)
COS-3 (Denied List 3)
COS-4 (Permission List 1 )
COS-5 (Permission List 2)
COS-6 (Permission List 3)
COS-7 (Default for all lines)
Extension
Number (up to 20 digits)
1 - Analog line: Pulse (DP)
2 - Analog line: Multifre-
quency (MF)
pág. 7-25
pág. 7-26
Completing Default
Data Entry
# instead of 0
extension
# instead of 0
extension
# instead of Class - 77 for
extension all exten-
sions.
Note:
Class - 7 Day
Class - 7
Night
5-second time- All entries are
out blank
# instead of 2 - MF
external line
7-3