Sony MVS-8000X User Manual page 1187

100.00%: Set the grid size to the full-screen size (100% of the screen
frame)
5
When in step 3 you selected [Box1] or [Box2], in the <Box1 Adjust> or
<Box2 Adjust> group, select the screen aspect ratio (16:9/14:9/4:3).
When in step 3 you selected [Grid], in the <Grid Adjust> group, select the
screen aspect ratio (16:9/4:3).
Cropping the image to a 4:3 aspect ratio in an HD system
In an HD system, to crop an image having a screen aspect ratio of 4:3 to an
aspect ratio of 4:3, use the following procedure.
1
In the Switcher >Output menu, press [4:3 Crop].
The 4:3 Crop menu appears.
The status area shows the output ports and respective 4:3 Crop mode
settings.
2
Press [4:3 Crop], turning it on.
This enables the crop setting, and this is reflected in the status area.
Notes
When the screen aspect ratio of 16:9 is selected for all M/E banks in the System
>Format >Active Line/Aspect menu, the setting of 4:3 Crop is disabled.
Setting the format converter outputs
To set the format converter
Display the Switcher >Output >FC Adjust menu. The subsequent operations
are the same as for the format converter input settings.
For details of the operations, see "Selecting the Format Converter
Conversion" (page 1176).
To copy format converter output data
1
In the Switcher >Output >FC Adjust menu, press [Copy].
The Copy/Swap >Copy >Format Converter menu appears.
2
In the <Data Select> group, press [Output].
3
Use the same operations as in steps 3 and 4 of "Copying format converter
input data" (page 1182) to copy the data.
Signal Output Settings (Output Menu)
1187