Sony MVS-8000X User Manual page 1197

The status area lists the current setting status of the selected link and the
buses that can be selected.
4
In the <Bus Select> group, select [Master Bus] (link source bus).
5
Using any of the following methods, select the bus to be the link source,
and press [Bus Set].
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter
2 No
a) Only when [Master Bus] is selected, M/E-1 to M/E-4 Trans PGM, and P/P Trans PGM are
available.
Only when [Linked Bus] is selected, AUX 1 to AUX 48 as Key are available.
Notes
With one of M/E-1 to M/E-4 Trans PGM and P/P Trans PGM selected
for [Master Bus], the link setting become effective as soon as you start
moving the fader lever.
6
In the <Bus Select> group, select [Linked Bus] (link destination bus).
7
Referring to step 5, select the bus to be the link destination, and press [Bus
Set].
8
Turn the knob to select the link table, and press [Link Table Set].
Knob Parameter
3 Link Table No
For more information about link tables, see the following item.
The selected link table number is confirmed, and this is reflected in the
status area.
To delete a link
Select the link you want to delete, then press [Clear] in the Switcher >Link
>Internal Bus Link menu.
Adjustment
Bus selection
Adjustment
Link table selection
Settings Relating to Function Links (Link Menu)
Setting values
a)
1 and upwards
Setting values
1 to 8
1197