Sony MVS-8000X User Manual page 1140

a) For the safe title on/off commands (from ME1 PGM1 ST-ME1 PGM4 ST to AUX1 ST-AUX48
b) Pressing this button to turn it on enables key snapshot operations for all control blocks.
Assigning a menu shortcut to a memory recall button
1
2
3
4
To abandon the process of menu shortcut assignment
In the Prefs/Utility >Utility Module Assign menu, press [Menu Shortcut].
This exits the menu shortcut assignment mode.
Setting names to be displayed in memory recall buttons
Notes
The name you set using the following procedure is displayed only when "Menu
Shortcut" or "Utility Command" has been assigned to the selected memory
recall button. To set a name for display in a memory recall button to which
"Shotbox Recall" or "Macro Recall" has been assigned, use the Shotbox menu
or Macro menu.
1140
Setting Button Assignments (Prefs/Utility Menu)
ST), the name of the assigned output signal is shown.
Referring to the procedure up to step 3 on "Assigning a Function to a
Memory Recall Button in the Utility/Shotbox Control Block" (page 1135)
, select [Menu Shortcut].
The memory recall buttons in the utility/shotbox control block flash
orange.
Using any of the following methods, display the menu to which you want
to make a shortcut.
• In the menu control block, press the relevant top menu selection button,
then select VF and HF.
• Press the menu page number button in the upper left corner of the menu
screen, then enter a menu number from the numeric keypad window.
• Press a particular control panel button twice in rapid succession.
In the utility/shotbox control block, select the bank, and press the button to
which you want to assign the shortcut.
The menu screen goes back to the Prefs/Utility >Utility Module Assign
menu, and the selection is reflected in the status area.
The buttons in the utility/shotbox control block flash.
Repeat steps 2 and 3 as required, to assign all desired menu shortcuts to
the buttons in the utility/shotbox control block.