Spool Fatal Hd - Xerox DocuColor 2240 Service Manual

116-361 Spool Fatal HD

Fatal error of the SPL HD
The spool Cont detected an error at HDD access.
Procedure
Switch power off then on. The problem continues.
Y N
Return to service call procedures.
Run the HDD Diag (dC355).
Replace the HDD (PL 13.1).
If the problem continues, replace the ESS PWB
Status Indicator RAPs
116-361, 116-365
(PL 13.1).
116-365 Spool Fatal
Fatal error of the SPL
Due to an error during the software processing, the subsequent processes cannot be per-
formed.
Procedure
Switch power off then on. The problem continues.
Y N
Return to service call procedures.
Perform re-installation of the ESS software.
If the problem continues, replace the ESS PWB
02/03
2-478
(PL 13.1).
Initial issue
DC 3535/2240/1632