8.
Remove Left Cover Assembly
(Figure
1
Remove Clip and
disconnect Stop
2
Support Left Cover
Assembly while per-
form steps 3 and
4
Lower Left Cover Assembly and then
lift to disengage hinges and remove it
Figure 2 Removing Left Cover Assembly
Replacement
Install Left Cover Assembly on hinge pins, manually align marks on Motion Damper, then tip up
transport to engage Motion Damper gears and connect stop arm on Stop Pin
Repairs and Adjustments
REP 8.1
2).
3
Remove
Screw and
lift up Stop
Arm
(Figure
Before closing Left Cover Assembly to connect harness, hold up black plastic Duplex Baffle
while closing transport.
Figure 3 Aligning Marks on Motion Damper
3).
02/03
4-68
CAUTION
Marks on
Stop Pin
Motion
Damper
Hinge
Pin
Initial issue
DC 3535/2240/1632