116-321 System Software
Due to an error during the software processing, the subsequent processes cannot be per-
formed.
Procedure
Switch power off then on. The problem continues.
Y
N
Return to service call procedures.
Re-install the ESS software.
If the problem continues, replace the ESS PWB
Status Indicator RAPs
116-321, 116-323
(PL
13.1).
116-323 ESS NVRAM W/R Check
An error was detected at the W/R check of the NVM in the ESS PWB.
Procedure
Switch power off then on. The problem continues.
Y
N
Return to service call procedures.
Switch off the power. Reseat the ESS PWB and the connector for the ESS Fan
problem remains replace the ESS Fan
the ESS Fan
(PL
13.1).
02/03
2-462
(PL
(PL
13.1). If this does not resolve the problem, replace
DC 3535/2240/1632
13.1). If the
Initial issue