Dadf Open - Xerox DocuColor 2240 Service Manual

6-300 DADF Open

The DADF was opened during the DADF Job.
Procedure
Enter dC330 [006-300] and place a magnet over the Platen Open Switch
play changes.
Y N
Remove the Platen Glass (REP 6.2). Remove IIT/IPS Cover
between P/J722-A2 and ground. The display changes.
Y N
Replace the IPS/IIT PWB (PL
Check the circuit of the Platen Open Switch for an open circuit
good, Replace the Platen Open Switch
Replace the magnet in the DADF.
Figure 1 6-300 RAP Circuit Diagram - Platen Open Switch
Status Indicator RAPs
6-300, 6-312
(PL 18.4). The dis-
(PL 18.3). Connect a jumper
18.3).
(Figure 1). If the wires are
(PL 18.4).
6-312 IIT Memory Hot Line
The system detected an open circuit in the IIT Memory Hot Line.
Procedure
Switch off the power. Reseat all connections on IIT/IPS PWB. Switch on the power. The prob-
lem continues.
Y N
Return to Service Call Procedures.
Replace the IIT/IPS PWB (PL 18.3).
02/03
2-98
Initial issue
DC 3535/2240/1632