Iq23 Bcr Checkout Rap - Xerox DocuColor 2240 Service Manual

IQ23 BCR Checkout RAP

Procedure
The problem is very high single-color background
Y N
TBD
Swap the Drum Cartridge that creates the high single-color background with any of the other
Drum Cartridges and make a test print. The background color remains the same.
Y N
Replace the Drum Cartridge causing the single-color background (see
ables in Section 6) (PL 4.1).
Go to Flag 3. Check the wires associated with the problem color for an open circuit. The
wires check out OK.
Y N
Repair or replace harness as required
Inspect the contact at the Drum Cartridge associated with the problem. The contact checks
out OK.
Y N
Repair or replace as required (PL 9.3).
Check for a loose connection at BCR HVPS PWB,
good.
Y N
Reconnect, repair or replace as required.
At P/J581, check the pin associated with the problem color for -400 VDC and 500 VDC. The
voltages checks out OK.
Y N
Replace the BCR HVPS PWB (PL
• Check the Wire Harness (PL 9.3, item 2) between the BCR HVPS PWB and the Drum
Cartridge for an open circuit. Repair or replace as required.
• Replace the affected Drum Cartridge (see
• Replace the BCR HVPS PWB (PL
Initial issue
DC 3535/2240/1632
Machine Consum-
(PL 9.3).
P/J581 (Figure 1). The connection
9.1).
Machine Consumables in Section 6)
9.1).
is
(PL 4.1).
02/03
3-25
Image Quality
IQ23