Rear Panel - NETGEAR WNAP320 Reference Manual

Rear Panel

Figure 2.
The access pointrear panel functions are described in the following list:
Power socket. This socket connects to the WNAP320 12V 1.0A power adapter.
1.
RJ-45 Ethernet port. Use the WNAP320 Ethernet RJ-45 port to connect to an Ethernet LAN
2.
through a device such as a hub, switch, router, or PoE switch.
Restore factory settings button. The restore to settings button restores the access point to
3.
the factory default settings.
14 | Chapter 1. Introduction
ProSafe Wireless-N Access Point WNAP320 Reference Manual
3 2
1