802.11B/G/N Standards-Based Wireless Networking; Autosensing Ethernet Connections With Auto Uplink - NETGEAR WNAP320 Reference Manual

Quality of Service (QoS) Support. You can configure parameters that affect traffic flowing
•
from the product family to the client station and traffic flowing from the client station to the
product family. The QoS feature allows you to prioritize traffic, such as voice and video
traffic, so that packets do not get dropped.
VLAN security profiles. Each security profile is automatically allocated a VLAN ID when
•
the security profile is modified.
802.11b/g/n Standards–based Wireless Networking
The NETGEAR ProSafe Wireless-N Access Point WNAP320 provides a bridge between
Ethernet wired LANs and 802.11b/g and 802.11 draft n–compatible wireless LAN networks. It
provides connectivity between Ethernet wired networks and radio-equipped wireless
notebook systems, desktop systems, print servers, and other devices. Additionally, the
access point supports the following wireless features:
Aggregation support
•
Reduced InterFrame spacing support
•
Multiple input, multiple output (MIMO) support
•
Distributed coordinated function (CSMA/CA, back-off procedure, ACK procedure,
•
retransmission of unacknowledged frames)
RTS/CTS handshake
•
Beacon generation
•
Packet fragmentation and reassembly
•
Auto or long preamble
•
Roaming among access points on the same subnet
•

Autosensing Ethernet Connections with Auto Uplink

The access point can connect to a standard Ethernet network. The LAN interface is
autosensing and capable of full-duplex or half-duplex operation.
The product family incorporates Auto Uplink
senses whether the Ethernet cable plugged in to the port should have a "normal" connection
such as to a computer or an "uplink" connection such as to a switch or hub. That port then
configures itself correctly. This feature also eliminates any concerns about crossover cables,
as Auto Uplink accommodates either type of cable to make the right connection.
12 | Chapter 1. Introduction
ProSafe Wireless-N Access Point WNAP320 Reference Manual
technology. The Ethernet port automatically
TM