Rear Panel - NETGEAR ProSafe WG302 Reference Manual

Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG302
LED Description
802.11g WLAN Wireless LAN Link Activity Indicator (2.4 MHz)
Off
Green Blink

Rear Panel

1
2
Figure 2-2
Viewed from left to right, the back of the WG302 provides the following:
1. Left and Right Detachable Antennas.The WG302 provides two detachable antennas.
2. Reset button. This restores the default factory settings.
3. Serial Console Port. Use the male DB-9 serial port for serial DTE connections.
4. RJ-45 Ethernet LAN/POE Port. Use the WG302 Ethernet RJ-45 port to connect to an Ethernet
LAN through a device such as a hub, switch, router, or Power Over Ethernet (POE) switch.
5. Power socket. This connects to the WG302 power adapter.
2-8
No wireless link activity.
Wireless link activity.
1
3 4 5
v0.1, December 2005
Introduction