Hardware Description; Front Panel - NETGEAR WNAP320 Reference Manual

ProSafe Wireless-N Access Point WNAP320 Reference Manual

Hardware Description

This section describes the front and rear hardware functions of the access point.

Front Panel

The WNAP320 hardware functions are described in the following figure and table.
Figure 1.
The following table explains the LED:
Table 1. Front Panel LEDs
Item LED DESCRIPTION
1 Power
Off. Power is off.
On. Power is on.
2 Test
Blinking. The device is running a self-test or is loading software. This LED
may blink for a minute before going off. If it continues to blink, it indicates a
system fault.
3 Ethernet LAN Speed
Off. A 10 Mbps or no link detected.
Amber. A 10/100 Mbps link detected.
Green. A 1000 Mbps link detected.
4 WLAN
Blinking (Blue). Indicates Wireless activity has been detected.
1 2
4
3
Chapter 1. Introduction | 13