Key Features And Standards; Supported Standards And Conventions - NETGEAR WNAP320 Reference Manual

Key Features and Standards

The ProSafe Wireless Access Point is easy to use and provides solid wireless and
networking support. It also offers a wide range of security options.

Supported Standards and Conventions

The following standards and conventions are supported:
Standards Compliance. The wireless access point complies with the IEEE 802.11 b/g
•
standards for wireless LANs, and is WiFi certified for 802.11n draft 2.0 standard.
Full WPA and WPA2 support. The wireless access point provides WPA and WPA2
•
enterprise-class strong security with RADIUS and certificate authentication as well as
dynamic encryption key generation. The WPA-PSK and WPA2-PSK preshared key
authentication is without the overhead of RADIUS servers but with all of the strong
security of WPA.
Multiple BSSIDs. The access point supports multiple BSSIDs. When a product family is
•
connected to a wired network and a set of wireless stations, it is called a Basic Service
Set (BSS). The Basic Service Set Identifier (BSSID) is a unique identifier attached to the
header of packets sent over a WLAN that differentiates one WLAN from another when a
mobile device tries to connect to the network.
The multiple BSSID feature allows you to configure up to eight SSIDs per radio mode on
your access point and assign different configuration settings to each SSID. All the
configured SSIDs are active, and the network devices can connect to the access point by
using any of these SSIDs.
DHCP client support. DHCP provides a dynamic IP address to PCs and other devices
•
upon request. The access point can act as a client and obtain information from your
DHCP server; it can also act as a DHCP server and provide network information for
wireless clients.
SNMP Support. Support for Simple Network Management Protocol (SNMP)
•
Management Information Base (MIB) management.
802.1Q VLAN (virtual LAN) support. A network of computers that behave as if they are
•
connected to the same network even though they might actually be physically located on
different segments of a LAN. VLANs are configured through software rather than
hardware, which makes them extremely flexible. VLANs are very useful for user and host
management, bandwidth allocation, and resource optimization.
10 | Chapter 1. Introduction
ProSafe Wireless-N Access Point WNAP320 Reference Manual