Using The Restore Factory Settings Button To Restore Default Settings - NETGEAR WNAP320 Reference Manual

ProSafe Wireless-N Access Point WNAP320 Reference Manual
Using the Restore Factory Settings Button to Restore
Default Settings
The Restore factory settings button (see
Reboot. When this button is pressed and released quickly, the WNAP320 reboots
•
(restarts).
Reset to factory defaults. This button can also be used to clear all data and restore all
•
settings to the factory default values.
To clear all data and restore the factory default values:
Power off the WNAP320, and power it back on.
1.
Use something with a small point, such as a pen, to press the restore settings button in and
2.
hold it in for at least 5 seconds.
Release the restore settings button.
3.
The factory default configuration has now been restored, and the WNAP320 is ready for use.
on page 14) has two functions:
Rear Panel
Chapter 5. Troubleshooting and Debugging | 51