NETGEAR WNAP320 Reference Manual page 46

ProSafe Wireless-N Access Point WNAP320 Reference Manual
To upgrade the WNAP320 firmware:
Download the new software file from the NETGEAR website, save it to your hard disk,
1.
and unzip it.
Select Maintenance > Upgrade > Firmware Upgrade. The Firmware Upgrade screen
2.
displays as shown in
Click Browse and browse to the location of the image (.rmg) upgrade file.
3.
Click Apply.
4.
When the upload is completed, your product family automatically restarts. The upgrade
process typically takes at least 3 minutes.
.
Figure 4,
Chapter 3. Management | 25