Figure 4.
Time Zone. From the drop-down list, select the local time zone for your product family
•
from a list of all available time zones. The default is USA-Pacific. The product family
will get the current time from the connecting PC.
NTP Client. Enable the NTP client to synchronize the time of the access point with an
•
NTP server. The default is Enable.
You must have an Internet connection to get the current time using
Note:
an NTP client.
Use Custom NTP Server. Select this check box if you have a custom NTP server.
-
The default is not selected.
Hostname / IP Address. Enter the host name or the IP address of the custom NTP
-
server. The default is time-b.netgear.com.
Click Apply.
2.
Select Configuration > IP to display IP Settings.
3.
20 |
Chapter 2. Installation and Configuration
ProSafe Wireless-N Access Point WNAP320 Reference Manual