Skoda KODIAQ2016 Owner's Manual page 48

Range - drive distance in km which can be covered with the existing tank ca-
pacity and with the same driving style. If you drive more efficiently this value
can increase.
®
AdBlue range - drive distance in km which can be covered with the existing
®
AdBlue tank capacity and with the same driving style. If you drive more effi-
ciently this value can increase.
Average fuel consumption - is calculated continuously since the last time the
memory was deleted. After erasing the memory, no data will appear for the
first 100 m driven.
Current fuel consumption - when the vehicle is stationary or slowly moving,
the fuel consumption is displayed in l/h (--,- km/l appears on models for some
countries).
Oil temperature - if the temperature is lower than 50 °C or if there is a fault in
the system for checking the oil temperature, the  symbols are displayed.
Warning when the preset speed is exceeded - allows the setting of a speed
limit where, if exceeded, an acoustic warning signal and a warning message ap-
pears on the display of the instrument cluster.
Traffic sign recognition - traffic signs display
nition.
Current speed - digital speedometer.
Average speed - is calculated continuously since the last time the memory
was deleted. After erasing the memory, no data will appear for the first 300 m
driven.
Driving route - distance driven since the last time the memory was deleted.
Driving time - driving time since the last time the memory was deleted.
Comfort consumers - information about the total consumption of the com-
fort consumers in l/h and a list of three consumers (e.g. air conditioning etc.),
which have the largest share of fuel consumption.
There is the option to show/hide the representation of the menu items of the
multifunction display in Infotainment in the instrument cluster display by tap-
ping →  → Instrument cluster and reset the journey data.

46
Operation
» page 256, Traffic sign recog-
Infotainment display
›
Press the button, then tap the function surface  → Tap Journey data.

Screen display » Fig. 30
Distance travelled
A
Driving time
B
Average speed
C
Average fuel consumption
D
Transit point rating (DriveGreen Function)
E
Range (if the estimated range is less than 300 km, the vehicle starts to ap-
F
proach the symbol )
G Approximate range
Use the function surfaces   to select one of the following preset lists.
Since start - Driving data for the individual trip
▶
Long-term - Long-term journey data
▶
▶ Since refuel - Data since refuelling
Warning when exceeding the set speed
The system offers the possibility to set a speed limit beyond which an acoustic
warning signal will sound and the following warning message appears in the
display of the instrument cluster.
Adjust the speed limit while the vehicle is stationary
›
Select the menu item Warning at at () or  () and confirm.
›
Set the desired speed limit is 5 km/h steps.
›
Confirm the set value, or wait several seconds; your settings will be saved
automatically.
Fig. 30
Journey data
