Skoda KODIAQ2016 Owner's Manual page 150

›
To connect, insert the USB audio source into the appropriate input.
›
To disconnect the USB, tap on the Media main menu function surface  →
Remove safely.
›
Disconnect the audio source from the corresponding USB input.
Load USB audio source
With Infotainment on after connecting the USB audio source, the charging
process is automatically started (applies for audio sources where charging via
the USB connector is possible).
The charging efficiency can differ compared to charging from the usual mains
power supply.
Depending on the type of the connected external device and the frequency of
use, the charging current may not be sufficient to charge the battery of the
connected device.
Some connected audio sources may not be recognised and cannot be charged.
CAUTION
USB extension cords, or reducers may impair the function of the connected
audio source.
Note
We recommend that you use extension cords from ŠKODA Original Accesso-
ries.
AUX input
The exact installation point of the AUX input  marked AUX input
›
To connect, insert the plug of the AUX audio source into the appropriate
connector.
›
To disconnect, pull the plug out of the AUX audio source.
CAUTION
The AUX input must only be used for audio devices!
■
If an external audio source is connected to the AUX input, which is equipped
■
with an adapter for external power supply, the sound may be impaired.
Note
The 3.5 mm stereo jack plug is used for the AUX input.
■
We recommend that you use extension cords from ŠKODA Original Acces-
■
sories.
148
Infotainment
®
Bluetooth player
Infotainment allows audio files of a connected Bluetooth
the A2DP and AVRCP audio profile.
With Infotainment, multiple devices can be paired using Bluetooth
one of them can be used as a Bluetooth
Connect / disconnect
›
To connect the Bluetooth
structions as for pairing Infotainment with a
›
To disconnect the Bluetooth
external devices
Replace Bluetooth
If you would like to replace a Bluetooth
ment as a phone at the same time, , then a relevant information message ap-
pears on the Infotainment screen.
›
End the connection to the currently connected Bluetooth
the pairing procedure
CAUTION
If an external device is connected to Infotainment using Apple CarPlay or
Android Auto, then it cannot be connected using Bluetooth
Jukebox
Only valid for Infotainment Columbus.
» page 88,
In the Jukebox (in the Infotainment internal memory), supported audio / video
files can be imported from connected external devices.
Import files
›
Tap the function surface in the Media main menu  → Manage jukebox → Im-
port.
›
Select the desired source.
›
Select the desired folders or files.
›
Tap the function surface  .
Delete files
›
Tap the function surface in the Media main menu  → Manage jukebox → Delete.
›
Select the desired folder or files in the selected category.
›
Tap the function surface  → Delete.
®
player.
®
player with Infotainment- follow the same in-
telephone» page
®
player, end the connection in the list of paired
» page 160.
®
player (applies to Infotainment Amundsen, Bolero)
®
-Player which is connected to Infotain-
» page 160, Managing paired external devices.
®
player to play using
®
, but only
160.
®
player and repeat
®
.
