Sound focus -Setting the optimum room sound perception
■
All - Setting optimised for the whole vehicle interior
■
Driver - Setting optimised for the driver
■
Touchscreen tone - Switch on/off audible tone when touching the screen
■
No navigation sound during call - Switching on / off the nav. announcements dur-
■
ing a telephone call (not applicable to Infotainment Bolero)
Display settings
›
Press the
button, then tap on the function surface Tap→ Screen.
Switch off screen (in 10 seconds) - Enable / disable the automatic power off func-
■
tion
Brightness: - Adjusts the brightness of the screen
■
Touchscreen tone - Switch on/off audible tone when touching the screen
■
Menu button tone - Turn on / off the acoustic signal by pressing a button next
■
to the screen
■
Animation when finger near screen - Turn the proximity sensors on/off (When the
function is on, e.g.Navigation will be shown in the main menu when moving a
finger towards the bottom bar with the function surfaces on the screen)
Show clock in standby mode - Time and date displayed on the screen when the
■
ignition is switched on and Infotainment is switched off
Time and date settings
›
Press the
button, then tap on the function surface → Time and date.
Clock time Source: - Settings of the clock time source: manual / GPS (applies to
■
the infotainment Columbus, Amundsen)
Time: - Time Settings
■
Summer time - Switches the summer time on/off
■
Automatic summertime - Turn on / off the automatic switch to daylight saving
■
time
Time zone: - Choice of time zone
■
Time Format: - Specify the time format
■
Date: - Date Settings
■
Date format: - Setting the date format
■
Setting the Infotainment language
›
Press the
button, then tap on the function surface → Language.
›
Select the Infotainment language.
130
Infotainment
In some languages, after selecting the function surfaceFemale and Male are dis-
played for the choice of voice prompts for Infotainment.
Note
When a language is selected which does not support voice control, Infotain-
■
ment will indicate this with a message on the screen.
The messages are generated by Infotainment. Flawless clarity (e.g. road or
■
city name) cannot always be guaranteed.
Additional keypad language settings
›
Press the
button, then tap on the function surface → Additional keypad
languages.
In this menu, a keyboard language set can be added to allow the entering of
characters other than those in the currently selected language (function sur-
face ).
Unit settings
›
Press the
button, then tap on the function surface → Units.
Distance: - Distance units
■
Speed: - Speed units
■
Temperature: - Temperature units
■
■
Volume: - Volume units
Consumption: - Consumption units
■
Pressure: - Printing units for tyre pressure
■
Setting data transfer
An active data transfer allows data transfer between Infotainment and the ex-
ternal device (e.g. MirrorLink® application) or the operation of some Infotain-
ment functions using the application of the external device (e.g. ŠKODA Media
Command).
›
Press the
button, then tap on the function surface → Mobile device data
transfer.