Roll-up cover
Fig. 132 Roll-up cover: Pull out / roll out / remove
Fig. 133 Stowing the roll-out cover
Read and observe
and
Extending
›
Grasp the cover at grip-point
A
until it audibly clicks into
place» Fig.
1
102
Operation
on page 99 first.
and pull it out in the direction of the arrow
132.
Retracting
›
Push the cover in the handle area
The cover rolls up automatically. The rolled-up cover can now be removed.
Removing/inserting
›
Press on the side of the cross bar in the direction of arrow
the cover in the arrow direction
Insertion takes place in reverse order.
Stowing - seven-seat variant
The removed roll-up cover can be stowed in the recesses of the luggage com-
partment side trim.
›
Lift the variable loading floor in direction of arrow
side recesses
» Fig.
133.
›
Open the side pockets on both sides of the luggage compartment in the di-
rection of arrows
2
.
›
Insert the roll-up cover in an inclined position in the recess of the right side
panel in the direction of arrow
›
Close the side pockets on both sides of the luggage compartment in the op-
posite direction to arrow
and restore the original position of the variable
2
loading floor.
WARNING
No objects should be placed on the roll-up cover - there is a risk of damage
to the cover and a risk of injury in the event of a sudden stop or a vehicle
collision!
in the direction of arrow
A
2
and remove
3
» Fig.
132.
4
and slide cover into the
1
and stow in arrow direction
3
4
» Fig.
132.
.