Skoda KODIAQ2016 Owner's Manual page 184

Alphanumeric keypad
E
Signal strength of the data services and ongoing data transmission
F
List of visited destinations
In the list of visited destinations, there is a maximum of 6 destinations shown,
each is identified with a letter.
In the navigation data roamed objectives.

Online roamed objectives.

Enter destination using the address
Fig. 225 Enter destination using the address: Main menu / list of visited
places
Display main menu
›
Route guidance is disabled - From the navigation main menu, the function
surface  .
›
Route guidance is enabled - From the main menu navigation, tap on the
function surface  → Tap Enter dest.
›
If the destination entry menu » Fig. 225
then tap on the function surface  → Address.
Enter dest.
›
Enter the destination address and then confirm.
Relevant names (e.g. Place/street names) are offered in the entry line during
entry, depending on the context. Previously entered names are offered on a
preferential basis.
The location of the destination offered, which is specified in the entry line in
parentheses, can be displayed in the map by tapping the function surfaceMap.
182
Infotainment
-  is not shown using the address,
List of locations visited
There is a possibility that a map with a list of places of the same name will be
displayed during entry» Fig. 225
The list of places visited can also be called up during address entry by pressing
the function surface  .
In the list of visited locations, there is a maximum of 6 locations shown,
marked with a letter. Then, these places are marked with the symbol  in the
map and a letter, which coincides with the character in the list of visited loca-
tions.
If several places were visited, then the list can be scrolled through by turning
the controller  or sliding the slider.
Note
While entering a street name there is an option to enter the centre of a given
■
place as a destination instead of a street name by tapping the function surface
Centre.
After entering the street name, the house number or intersection can be en-
■
tered using the name / number of the intersecting road.
Enter destination on the map and using GPS coordinates
Fig. 226 Enter dest.: over the map point / using GPS coordinates
Show map
›
Route guidance is disabled - From the navigation main menu, the function
surface  .
›
Route guidance is enabled - From the main menu navigation, tap on the
function surface  → Tap Enter dest.
›
Then tap the function surface  and choose the menu item On map.
- .
