›
Press the latch
on the holder in the direction of the arrow
C
›
Press the latch in the direction of arrow
rection of arrow
.
6
Fitting
›
Slide the plug into the light in the opposite direction of arrow
the plug must be inserted securely.
›
Insert the light with the openings
in the body and carefully press in the light
›
Screw in bolt
in the opposite direction to arrow
B
›
Insert the grille
in the associated opening in the lower area and press in
A
against the direction of arrow
CAUTION
When re-inserting the light, ensure that the wiring harness between the
■
body and the light is not jammed and the seal
rectly inserted - otherwise there is a risk of water ingress and damage to the
electrical installation.
Ensure that the vehicle paintwork and the tail lamp are not damaged when
■
removing and installing the lamp.
4
and pull out the holder in the di-
5
6
onto the studs
» Fig. 381
E
F
»
.
» Fig.
380.
2
.
1
» Fig. 381
on page 311 is cor-
D
.
Replace bulb for indicator light in the rear light
. The lock on
on page 311
Fig. 381 Replacing bulb / installing light
Read and observe
›
Turn the socket with the bulb to the stop in the direction of the arrow
» Fig.
381.
›
Remove the socket with the bulb in the direction of arrow
›
Remove the faulty bulb from the holder in the direction of the arrow
›
Insert a new bulb into the base in the direction opposite the arrow
›
Reinsert the base with the bulb into the light housing and turn in the oppo-
site direction to the arrow
and
on page 308 first.
up to the stop.
7
Fuses and light bulbs
7
.
8
.
9
Insert.
9
311