Skoda KODIAQ2016 Owner's Manual page 232

Activation / deactivation

Read and observe and
Activation
The system is activated by pressing the button 
reverse gear.
When activating, an alarm sounds and the symbol
When activated by pressing the button, the overall view
page 230 -  is displayed on the screen.
When activated by engaging the reverse gear, the view of the rear camera to-
gether with the thumbnail display of the overall view
 is displayed.
Deactivation
The system is deactivated by pressing  the button, by switching off the igni-
tion, by setting the selector lever to P mode, or by moving forward with a
speed over 15 km / h (the symbol
230
Driving
Fig. 285
Button for activation / deactiva-
tion
on page 229 first.
» Fig. 285 or by engaging the
illuminates in the button.

» Fig. 286
» Fig. 286 on page 230 -
goes out in the button).

Views and function surfaces
Fig. 286 Overall view / view of the rear camera with thumbnail display

Read and observe
The system displays the single view of a camera image or the overall view of all
the camera images at once.
The selection of the respective camera image is performed by touching the
on
screen in the area next to, in front of or behind the vehicle silhouette
» Fig. 286. The selected area is highlighted on the screen by a yellow framing
» Fig. 286 - ,
Function surfaces
3D views
1
 Top view
 View obliquely from above
 View from the side
 Change to overall view
Swiping in the arrow directions on the screen, the viewing angle can be
changed to the 3D views of the area around the vehicle.
To exit area view on the display
2
Display modes
3
4 Screen settings - brightness, contrast, colour
Thumbnail display of the overall view (toggle to overall view by touching
5
the vehicle silhouette on the screen)
   Switch thumbnail display on/off
and on page 229 first.
» Fig. 286
