Skoda KODIAQ2016 Owner's Manual page 300

The maximum towing speed is 50 km/h.

The vehicle must be transported on a special breakdown vehicle or trailer

if it is not possible to tow in the vehicle in the way described or if the tow-
ing distance is greater than 50 km.
Driver of the tow vehicle
›
On vehicles with manual transmission, engage gear slowly when starting.
›
On vehicles with automatic transmission, accelerate with particular care.
›
Only then approach correctly when the rope is taut.
Driver of the towed vehicle
›
If possible, the vehicle should be towed with the engine running. Operate the
brake booster and power steering only if the engine is running, otherwise the
brake pedal must be depressed more strongly and more power has to be di-
rected to the steering.
›
If it is not possible to start the engine, switch on the ignition so that the
steering wheel is not locked and so that the turn signal lights, windscreen
wipers and windscreen washer system can be used.
›
Take the vehicle out of gear or move the selector lever into position N if the
vehicle is fitted with an automatic gearbox.
›
Always keep the tow rope taut during the towing procedure.
WARNING
Wound tow ropes must not be used for towing
■
eye may unscrew out of the vehicle - risk of accident.
Ensure tow rope is not twisted - risk of accident.
■
CAUTION
Do not tow-start the engine – risk of damaging the engine! The battery from
■
another vehicle can be used as a jump-start aid
In the case of off-road towing manoeuvres, for both vehicles there is the risk
■
that the fastening parts could be overloaded and damaged.
Note
We recommend that you use the tow rope from ŠKODA Original Accessories.
298
Do-it-yourself
» Fig. 351- , the towing
» page 296, Jump-starting.
Front towing eye
Fig. 352 Remove protective grille / install towing eye
Removing/inserting protective grille
›
To remove, insert the clamp for taking off the full wheel trims in the recess
in the protective grille and remove the protective grille in the direction of ar-
row » Fig. 352.
1
›
To insert, insert the protective grille in the opening and push in gently. The
protective grille must engage firmly.
Removing/installing the towing eye
›
To fit, screw in the towing eye by hand in the direction of the arrow
» Fig. 352 until it clicks into place
2
For tightening purposes, we recommend, for example, using the wheel wrench,
towing eye from another vehicle or a similar object that can be pushed
through the eye.
›
To remove it, unscrew the towing eye in the opposite direction to arrow
WARNING
The towing eye must always be tightened, otherwise the towing eye may
break during the towing.
» .
.
2