Preset buttons for your favourite channels
In every broadcasting range, there are station buttons available to store pre-
ferred stations
That are split into groups
C
›
To save a station on the main menu Radio, hold down the desired function
surface
until an acoustic signal sounds.
C
›
To save a station in the station list, keep the function surface of the desired
station held down, select the memory group, and then tap the desired station
button.
If a station is saved on an already assigned station button, this station button
will be overwritten.
Station logos - Columbus, Amundsen, Bolero
Station logos are stored in the Infotainment memory which are assigned auto-
matically by the device when storing the stations under preset buttons.
Assign station logo automatically
›
to Disable / Enable in the radio main menu, tap on the function surface
Tap on→ Advanced settings → Auto-save station logos .
Assign station logo manually
›
Tap on the function surface in the Radio main menu → Station logos.
›
Tap on an occupied station button and select the data carrier (SD card, USB).
›
Search for and select the desired station logo on the respective data carrier.
Remove channel logo manually
›
Tap on the function surface in the Radio main menu → Station logos.
›
Tap on the station button from which you want to remove a logo.
Note
The following image formats are supported: jpg, gif, png, bmp.
■
We recommend a resolution of up to 500x500 pixels.
■
Station logos - Swing
The station button of a preferred station can contain the name and the station
logo.
Assign a station logo
›
Tap on the function surface in the Radio main menu → Station logos.
›
Tap on an occupied station button and select the data carrier (SD card, USB).
» Fig. 174
on page 141 or .
E
›
Search for and select the desired station logo on the respective data carrier.
Remove station logo
›
Tap on the function surface in the Radio main menu → Station logos.
›
Tap on the station button from which you want to remove a logo.
›
orThe function surface All to delete the logos of all the station buttons si-
multaneously.
›
Confirm / cancel the removal.
Note
jpg, gif, png, bmp (we recommend using the png format).
■
Maximum resolution 400x240 pixels.
■
TP Traffic program
›
To switch on/off traffic monitoring in the main menu Radio, tap on the func-
tion surface → Traffic programme (TP).
During a traffic announcement, it is possible to cancel the current announce-
ment if necessary by deactivating traffic monitoring.
Note
If the station that is currently set does not transmit traffic reports or the sig-
■
nal is not available, then Infotainment automatically searches in the back-
ground for another TP station.
During playback in the Media menu or a station in the AM radio range, traffic
■
news is received from the previously selected FM radio range.
143
Radio