Skoda KODIAQ2016 Owner's Manual page 172

Connect
Enable the Wi-Fi in the external device and search for any available hotspots.
▶
▶ Select the Infotainment hotspot (if necessary, enter the required password).
▶ Confirm the connection.
Establish secure connection using WPS (applies to Infotainment
Amundsen)
Turn on Infotainment in the device.
▶
Press the button, then tap on the function surface  → WIRELESS INTER-
▶

NET ACCESS → WIRELESS INTERNET ACCESS → WPS quick connection (WPS button)
Tap.
▶ Turn on the option to connect to Infotainment hotspot using WPS.
Note
If the external device is connected to the Infotainment hotspot (WLAN), then
the data connection to the external device cannot be used.
Connect infotainment with the hotspot (WLAN) of the external
device
Fig. 208 List of available wireless networks: Infotainment Columbus /
infotainment Amundsen
›
To Turn on / off the Infotainment WLAN press the button
function surface →  → WIRELESS INTERNET ACCESS → WIRELESS INTERNET AC-
CESS → WIRELESS INTERNET ACCESS Tap.
1)
As long as Infotainment is connected to the hotspot of the external device, its hotspot name is displayed in
this function surface.
170
Infotainment
Show available hotspots
Press the
▶
NET ACCESS → WIRELESS INTERNET ACCESS
With WLAN activated, a list of available or previously connected hotspots with
the following information and function surfaces is displayed
Searching for available hotspots
A
Turn Infotainment WLAN on/off
B
Manual hotspot search and connect
C
Automatic establishment of the secure connection to the hotspot via WPS
D
(Applies to Infotainment Amundsen)
Functional surfaces of the available hotspots
E
Disconnection from the currently connected hotpot by deleting the Info-
F
tainment memory access password (The function surface will only be
shown when connected)
Current connection

Wi-Fi strength of the external device

Connect
▶ Turn on Infotainment in the device.
Show the list of available hotspots, if necessary, update the list by tapping
▶
the function surface Find.
Select the desired hotspot.
▶
▶ If the access to the hotspot is password protected, then enter the required
password.
Search for connection manually and connect
Turn on Infotainment in the device.
▶
Display list of available hotspots.
▶
Tap on the function surface Manual settings and set the required hotspot pa-
▶
rameters.
▶ Tap the function surface Connect.
, then the
 ▶ If the parameters for the search are set correctly and the hotspot is available,
then the connection will take place.
button, then tap on the function surface  → WIRELESS INTER-

Tap.
1)
» Fig. 208.
