Siemens SINUMERIK 840D sl Operating Manual page 649

Procedure
Note
Once you have stored an entry this can no longer be changed or deleted.
Searching for a logbook entry
You have the option for searching for specific entries using the search function.
Additional search option
Milling
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
1. The logbook is opened.
2. Press the "New entry" softkey.
The "New logbook entry" window opens.
3. Enter the required data and press the "OK" softkey.
You return to the "Machine logbook" window and the entry is displayed
below the machine identity data.
1. The "Machine logbook" window is opened.
2. Press the "Search..." softkey and enter the desired term in the search
form. You can make a search according to date/time, company
name/department or according to fault diagnostics/measure.
The cursor is positioned on the first entry that corresponds to the search
term.
3. Press the "Continue search" softkey if the entry found is not the one that
you are looking for.
Press the "Go to Beginning" softkey to start the search at the latest
entry.
Press the "Go to End" softkey to start the search at the oldest entry.
Alarms, error messages, and system alarms
21.7 Logbook
649