Siemens SINUMERIK 840D sl Operating Manual page 409

Parameter Description
Z Starting point Z (abs)
X Starting point X ∅ (abs)
Transition to Type of transition
contour start
Radius
•
Chamfer
•
FS=0 or R=0: No transition element
R Transition to following element – radius
FS Transition to following element – chamfer
Milling
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
3. Press the "Contour" and "New contour" softkeys.
The "New Contour" input window opens.
4. Enter a name for the new contour. The contour name must be unique.
5. Press the "Accept" softkey.
The input window for the starting point of the contour appears.
Enter the individual contour elements (see Section "Creating contour
elements").
Programming technological functions (cycles)
8.5 Contour turning - only for G code programs
Unit
mm
mm
mm
mm
409