Displaying Setting Data Lists; Handwheel Assignment - Siemens SINUMERIK 840D sl Operating Manual

2.9

Displaying setting data lists

You can display lists with configured setting data.
Procedure
2.10

Handwheel assignment

You can traverse the axes in the machine coordinate system (Machine) or in the workpiece
coordinate system (Work) via the handwheel.
All axes are provided in the following order for handwheel assignment:
● Geometry axes
● Channel machine axes
Milling
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. Select the "Parameter" operating area.
2. Press "Setting data" and "Data lists" softkeys.
The "Setting data list" window opens.
3. Press the "Select data list" softkey and in the "View" list, select the
required list with setting data.
Software option
You require the "Extended operator functions" option for the handwheel offset
(only for 828D).
When traversing, the geometry axes taken into account the actual machine status (e.g.
rotations, transformations). All channel machine axes, which are currently assigned to the
geometry axis, are in this case simultaneously traversed.
Channel machine axes are assigned to the particular channel. They can only be
individually traversed, i.e. the actual machine state has no influence.
The also applies to channel machine axes, that are declared as geometry axes.
Setting up the machine
2.9 Displaying setting data lists
119