Key
Milling
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
Function
+
<NEXT WINDOW> + <CTRL>
• Moves the cursor to the beginning of a program.
• Moves the cursor in the first row of the current column.
+
+
<NEXT WINDOW> + <CTRL> + <SHIFT>
• Moves the cursor to the beginning of a program.
• Moves the cursor in the first row of the current column.
• Selects a contiguous selection from the current cursor
• Selects a contiguous selection from the current cursor
<PAGE UP>
Scrolls upwards by one page in a window.
+
<PAGE UP> + <SHIFT>
In the program manager and in the program editor from the
cursor position, selects directories or program blocks up to the
beginning of the window.
+
<PAGE UP> + <CTRL>
Positions the cursor to the topmost line of a window.
<PAGE DOWN>
Scrolls downwards by one page in a window.
+
<PAGE DOWN> + <SHIFT>
In the program manager and in the program editor, from the
cursor position, selects directories or program blocks up to the
end of the window.
+
<PAGE DOWN> + <CTRL>
Positions the cursor to the lowest line of a window.
<Cursor right>
• Editing box
• Navigation
position up to the target position.
position up to the beginning of the program.
Opens a directory or program (e.g. cycle) in the editor.
Moves the cursor further to the right by one character.
Introduction
1.2 Operator panel fronts
23