Procedure
Parameters, G code program
PL
Machining plane
Milling direction
RP
Retraction plane
SC
Safety clearance
F
Feedrate
Parameter
Description
Reference point
Position of the reference point:
(lefthand edge)
•
(inside left)
•
(center)
•
(inside right)
•
(righthand edge)
•
Milling
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
1.
The part program or ShopMill program to be processed has been
created and you are in the editor.
2.
Press the "Milling" softkey.
3.
Press the "Groove" and "Longitudinal groove" softkeys.
The "Longitudinal Groove (SLOT1)" input window opens.
mm
mm
*
Programming technological functions (cycles)
Parameters, ShopMill program
T
Tool name
D
Cutting edge number
F
Feedrate
S / V
Spindle speed or constant
cutting rate
8.2 Milling
mm/min
mm/tooth
rpm
m/min
Unit
327