Displaying and inserting a G code command in the editor
See also
Additional functions in the input screens (Page 224)
Milling
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
1.
A program is opened in the editor.
Position the cursor on the desired G code command and press the
<HELP> or the <F12> key.
The associated G code description is displayed.
2.
Press the "Display all G functions" softkey.
3.
With the aid of the search function, select, for example, the desired G
code command.
4.
Press the "Transfer to editor" softkey.
The selected G function is taken into the program at the cursor position.
5.
Press the "Exit help" softkey again to close the help.
Introduction
1.4 User interface
55