Siemens SINUMERIK 840D sl Operating Manual page 27

Key
Milling
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
Function
+ <CTRL> + <A>
In the actual window, selects all entries (only in the program
editor and program manager).
+ <CTRL> + <C>
Copies the selected content.
+ <CTRL> + <E>
Calls the "Ctrl Energy" function.
+ <CTRL> + <F>
Opens the search dialog in the machine data and setting data
lists, when loading and saving in the MDI editor as well as in the
program manager and in the system data.
+ <CTRL> + <L>
Scrolls the actual user interface through all installed languages
one after the other.
+ + <CTRL> + <SHIFT> + <L>
Scrolls the actual operator interface through all installed
languages in the inverse sequence.
+ <CTRL> + <P>
Generates a screenshot from the actual operator interface and
saves it as file.
+ <CTRL> + <S>
Switches the single block in or out in the simulation.
+ <CTRL> + <V>
• Pastes the text from the clipboard at the actual cursor
• Pastes text from the clipboard at the position of a selected
+ <CTRL> + <X>
Cuts out the selected text. The text is located in the clipboard.
+ <CTRL> + <Y>
Reactivates changes that were undone (only in the program
editor).
+ <CTRL> + <Z>
Undoes the last action (only in the program editor).
position.
text.
Introduction
1.2 Operator panel fronts
27