Parameter
FS or R
X1
FR
SR
X2
* Unit of feedrate as programmed before the cycle call
Milling
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
Description
Chamfer width or rounding radius
Depth for speed reduction ∅ (abs) or depth for speed reduction in relation to X0
(inc)
Reduced feedrate
Reduced speed
Final depth ∅ (abs) or final depth in relation to X1 (inc)
Programming technological functions (cycles)
8.4 Turning - only for G code programs
Unit
mm
mm
*
rev/min
mm
405