Siemens SINUMERIK 840D sl Operating Manual page 268

Creating a ShopMill program
7.17 Example, standard machining
11. Obstacle
Note
If this obstacle cycle is not inserted, the drill will violate the right-hand corner of the island
contour. Alternately, you could increase the safety clearance.
12. Positions
268
1. Press the "Drilling", "Positions", and "Obstacle" softkeys.
The "obstacle" input window opens.
2. Enter the following parameters:
Z
3. Press the "Accept" softkey.
1. Press the "Drilling", "Positions" and "Drilling Positions" softkeys.
The "Any positions" input window opens.
2. Enter the following parameters:
Z0
X2
Y2
X3
Y3
3. Press the "Accept" softkey.
2abs
Rectangular
-10abs
165abs
165abs
15abs
165abs
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
Milling